TYPE - LNMP This nonmetallic liquidtight conduit is ideally suited for continuous flexing situations. It is often specified in "Power Track" or cable carrier installations and on industrial robots. It does not contain a metal core which could fatigue from repeated flexing or vibration.
CONSTRUCTION: LNM-P is of the Layered, Type-A construction which incorporates a smooth seamless inner core of flexible PVC that is bonded to a covering of flexible PVC. Between these layers is a woven nylon mesh for added reinforcement. The PVC material is a high quality, flame-retardant compound which resists oils, mild acids and exposure to sunlight.
APPLICATION: Type LNM-P is intended for installation in accordance with Article 356 of the NECŪ (ANSI/NFPA-70) for flexible liquidtight nonmetallic Conduit (LFNC-A or FNMC-A). -For containment of 600 volt and lower potential circuits. -Listed and Marked for Outdoor Use. -Installations in hazardous (classified) Locations: Class I Div. 2 Article 501 Class II Div. 1& 2 Article 502 Class III Div. 1 & 2 Article 503 -Electric Signs and Outdoor Lighting over 1000 volts. Article 600.31(A) -Wiring methods for pools and spas.
Article 680 Conforms to the requirements of Section 14.5.5 of the electrical Standard for Industrial Machinery NFPA-79.
Listed File # E 79308 Conforms to Underwriters Laboratories Standard ANSI/UL 1660 type A
Certified File #LL 18858 Conforms to CSA 22.2 No. 227.2 type A
Fittings: Fittings for Layered Conduit are for that conduit only and are so identified by the marking "FNMC-A" or "LFNC-A" for Liquidtight Flexible Nonmetallic Conduit type A 1/2" straight examples include:
- Thomas & Betts (Steel) #3721 (Plastic) #6302 - Appleton Electric # STNM-50 - Kellems / Hubbell # H050CNK
Listed File # E 79308
Certified File #LL 18858